Upvc Door Lock Mechanism Repair
The majority of uPVC door locks are multipoint. The lock is comprised of a centre case/gearbox and top and bottom locking points, which are fitted with rollers or hooks.
It can be a challenge to adjust the mechanisms as uPVC expands or contracts with the weather. It is best to leave this task to a professional locksmith like Secure Solution.
Misalignment
Misalignment is one of the most frequent problems encountered by door lock mechanisms made of upvc. This happens when the door moves or settles and no longer lines up correctly with all locking points in the multipoint lock mechanism. This could result in the handle not being able to close the door or secure it.
Dirt or debris can get into the lock mechanism and cause misalignment of upvc doors. With a clean, damp paper towel or a damp cloth clean the lock to remove any dirt or dust that may have accumulated. In addition, lubricating the lock can help keep it in a smooth and efficient state. A graphite-based spray or a silicone-based powder is ideal for this. It is essential to ensure that your lock is lubricated at least twice per year and especially before rainy seasons.
If the problem persists it is recommended to contact an expert. They can adjust the hinges as well as ensure that the doors are correctly aligned at all locking points. A locksmith can also be able advise on security upgrades for your home.
A lock made of upvc may require replacing if it's not functioning properly due to wear and tear or damage. A professional will be able to replace the old lock with a new, high-security model without damaging your door or affecting your insurance coverage for your home.
If your door handle made of upvc does not lock when closed, shut it, then push down on the euro or the deadbolt. If the handle is pushed downwards but does not lift it, the gearbox (which is located inside the upvc) is faulty and needs to be replaced. Your Locksmith can replace this and your upvc should function correctly again. This is a much less costly fix than replacing the entire multipoint lock. Prices will differ based on the type and model of your upvc doors, but you should expect to pay a locksmith for an hour's labor plus any callout fees. Contact your local Locksmith for a quote.
Cylinders that are worn or damaged
If your key doesn't turn in the lock, or is turning but the bolt does not release it could be an issue with the cylinder. If the cylinder is worn down or damaged, it may need to be replaced to allow the lock to perform properly. It isn't easy to replace the cylinder so we would recommend calling a professional locksmith for this type of repair.
Before you begin this kind of fix for your lock mechanism ensure you have the correct tools. You'll require an screwdriver and a tape measure. A rubber mallet may also be needed. Start by removing the screws that secure the lock and then note where they are so that you can put them back in their original positions to reassemble them later. After removing the old lock, check each component for any damage. Before reassembling, take out upvc doors repair broken pieces and clean each piece.
When replacing the cylinders identify the manufacturer using the faceplate or identification marks on the spindles on the handle. This will help to find the replacement that is similar to the original. Once the new cylinder is installed, test the lock to make sure it's working correctly.
Another issue that is common to Upvc doors is a the misalignment. Over time, changes in temperature, weathering, and ground movement can cause tiny shifts in the upvc doors as well as frames. This could cause the door to pull slightly out of alignment with the lock, which can cause it to become stiffer or not close properly.
A professional locksmith can provide a complete door alignment, which involves removing hinges and panels to return the components into acceptable tolerances. It is recommended to delegate this task to a professional since upvc doors and frames can be damaged if not handled by locksmiths.
A broken lock is more than just an inconvenience - it can pose a significant security risk. It is crucial to address any issues promptly to ensure you enjoy the peace of mind that a functional lock offers. Our team of locksmiths are on call all hours of the day to help you resolve any issues you may encounter with your upvc doors, including fixing a sticky mechanism or installing new high-security locks.
Locks are stiff or jammed
If your lock is sluggish or jammed, a professional locksmith should be called in to address the issue and ensure your home and property are secure. Ignoring this problem could make your door vulnerable to break ins and make it impossible to open. It is essential to address the issue as soon as you can, regardless of whether it's caused by dirt or changes in weather. This will ensure your safety and the security of you and your family members.
There are a variety of solutions to this issue. Lubrication, for instance, can help the mechanism move without friction. Applying a silicon spray or graphite powder lubricant can significantly reduce the resistance. You can also adjust the strike plate or the hinges so that they are aligned properly with the frame. If the issue persists, it may be necessary to replace the mechanism.
Damage is another common cause of a stiff lock or jammed lock. If your lock has been hit or smashed hard, it could be broken beyond repair. In this instance, the entire mechanism will require replacement. If you're not ready to purchase a new door, you may also attempt to manipulate the individual pin tumblers using slim, angled picking tools. This technique requires advanced skills as well as specialised tools.
Over time locks on uPVC doors may wear out or be damaged through frequent use or environmental factors. It is crucial to contact an expert if the cylinder or multipoint lock system is damaged in order to prevent further damage.
A professional locksmith is equipped with the knowledge, expertise and tools to recognize and fix uPVC lock problems. They can realign the door, change lock cylinders and multipoint locks and repair other issues such as jammed or stiff mechanisms. This will protect your family and home from intruders while keeping it secure. Do not hesitate to contact an expert locksmith if you notice any problems with your uPVC doors.
Mechanisms for Sticking
A upvc door lock is prone to getting stuck due to various reasons. One of the most common causes is dust or dirt accumulation, which can hinder the mechanism and stop it from working smoothly. Additionally, changes in weather conditions can cause the lock and door to expand or contract, which can alter the alignment of the mechanisms. Regular cleaning and lubrication will aid in avoiding these issues.
Another possible reason for stuck uPVC lock is the possibility of a snapped key. If the key remains protruding from the lock, it could be possible to get it back using needle-nose pliers or a magnet. It is important to not force the key to open as this could cause damage to the lock and will require replacement parts.
A damaged uPVC lock mechanism could be a sign of a bigger issue. In certain instances an expert locksmith or uPVC expert can provide the service you require to repair the issue and ensure that your door is safe.
Many people believe that their uPVC door is more secure than a wooden door. However, it's crucial to be aware of the security dangers that can be posed by an unsecure lock. Intruders can use simple lock picking techniques to alter the lock's individual pin tumblers, which can allow them to unlock your door and gain entry to your business or home. To avoid this, it is important to ensure that your uPVC locks are installed correctly and maintained, and are regularly inspected for signs of wear or damage.